serpentine belt

Moderators: smarterthanyou, Founder

serpentine belt

Postby RB25DET » 05 Jul 2010, 23:07

I've been trying to order a serpentine belt for an M1123 with the MAK kit on it. However I can't find the correct NSN to order it. I've ordered it with the NSN I found in the TM but it is the wrong one. Because the Belt that I received was 97 inches long and it fits the M1123 without the compressor for the air conditioning system. The one that I need is 126.5 inches long. I looked at the TI for the MAK Kit it has the same NSN that I found in the TM and it was wrong. Everytime I ordered it I got the shorter belt.
Any Ideas?
RB25DET
 
Posts: 4
Joined: 23 Jun 2010, 13:33

Re: serpentine belt

Postby WRECKERMAN » 07 Jul 2010, 11:36

3030-01-488-5606 is the NSN for the longer belt....
WRECKERMAN
Site Founder
Site Founder
 
Posts: 117
Joined: 02 Jun 2010, 16:41

Re: serpentine belt

Postby RB25DET » 08 Jul 2010, 11:42

WRECKERMAN wrote:3030-01-488-5606 is the NSN for the longer belt....


Thanks for the help, but that the same NSN that I've been ordering. I keep getting the (wrong) shorer belt.
RB25DET
 
Posts: 4
Joined: 23 Jun 2010, 13:33

Re: serpentine belt

Postby WRECKERMAN » 09 Jul 2010, 06:20

Im sorry. I got the nsn from maint cntr barstow......ill keep looking
WRECKERMAN
Site Founder
Site Founder
 
Posts: 117
Joined: 02 Jun 2010, 16:41

Re: serpentine belt

Postby Horsey » 27 Sep 2010, 09:52

i'm having the same issue with the serpentine belt. any luck?
Horsey
Newb
Newb
 
Posts: 7
Joined: 23 Jun 2010, 11:41

Re: serpentine belt

Postby Horsey » 05 Nov 2010, 04:49

Do you have the old style power streering pump with the reservoir on the front of the engine? My truck doesn't have the new PS pump and it has a A/C compressor. the belt tensioner was so hyper extended on this tight belt that the belt was not riding on the belt tensioner pulley but it was riding on the belt tensioner body instead. It rubbed until it broke. Long story short (too late, right), I am submitting the truck for WIR for lack of supply support.
Horsey
Newb
Newb
 
Posts: 7
Joined: 23 Jun 2010, 11:41

Re: serpentine belt

Postby SUPERMOD » 09 Nov 2010, 08:55

"For vehicle M1123 with the AOA RED DOT air conditioning installed (s/n 196901 and above) uses belt NSN 3030015242460 part number RD5-11792-0P which is 126 inches long."

Judy Iglesias
Equipment Specialist HMMWV Legacy
Maintenance and Logistic Support
AMSTA-LCC-HL


THIS IS THE INFORMATION I GOT FROM HER. HOPE THIS IS THE RIGHT NSN FINALLY.
SuperMod
3521/0411/0916

"IF YOU DONT LIVE FOR SOMETHING, YOU DIE FOR NOTHING"
User avatar
SUPERMOD
Site Founder
Site Founder
 
Posts: 763
Joined: 02 Jun 2010, 16:33
Location: Camp Pendleton, Ca

Re: serpentine belt

Postby isma009 » 09 Aug 2011, 14:12

This should be the right nsn, i got this nsn straight from the military section at the RED DOT corporation. Good Luck!


SUPERMOD wrote:"For vehicle M1123 with the AOA RED DOT air conditioning installed (s/n 196901 and above) uses belt NSN 3030015242460 part number RD5-11792-0P which is 126 inches long."

Judy Iglesias
Equipment Specialist HMMWV Legacy
Maintenance and Logistic Support
AMSTA-LCC-HL


THIS IS THE INFORMATION I GOT FROM HER. HOPE THIS IS THE RIGHT NSN FINALLY.
isma009
 
Posts: 1
Joined: 09 Aug 2011, 14:06

Re: serpentine belt

Postby Petz » 07 May 2012, 06:28

check your Chassis Serial Numbers... your parts in the TM that are based on Ser No. 299999 and below or Ser No. 300000 and above are based on them!!!
Petz
It's Already Fixed
 
Posts: 262
Joined: 01 Jan 2011, 05:43
Location: Miramar, Ca


Return to Engine

Who is online

Users browsing this forum: No registered users and 1 guest

cron